About Us

FLAT BOTTOM SILOS

Being aware that high-quality production is only possible by specialized personnel, modern production techniques and full-automated production, AGROSILO zinc-plated steel silos and conveyance equipment are designed by the product development/design department to address all grain storage requirements and produced accordingly.
High-quality zinc-plated metal sheets used in silo production resist 450 MPA and are corrosion-resistant. The custom produced metal sheets used in the production of our silos have a zinc plating standard of 450 gr/m2 and 350 gr/ m². The zinc plating ratio changes according to customer demands. AGROSILO offers difference silo options, including flat and conical-bottom silos, starting from a diameter of 4.51 m diameter to 31.60 m. To be able to carry the vertical loads on the silo, vertical suspension supports mounted on the silo surface are used to yield maximum strength. AGROSILO vertical suspension supports perfectly distributes the pressure put by the grain in the silo on the side walls of the silo over the bottom of the silo.

CONICAL-BOTTOM SILOS

AGROSILO conical bottom grain storage steel silos can be used for multiple purposes. Conical bottom steel silos’ conical bottom angles are produced at 45-65 degrees according to the type and flow characteristics of grain to be stored. Conical bottom steel silos can especially be used in animal farms handling storage operations of various types of grains, and in facilities including feed and flour mills. They are also optimum for short-term and temporary grain storage. Side wall sheets, suspension supports and access doors of all AGROSILO conical bottom silos are made up of zinc-plated steel sheet. Steel, due to its structural characteristics, is very resistant in conical bottoms. AGROSILO offers you conical bottom steel silo options in various sizes and capacities from 2,11m to 10,83m.

Business size

1-10 employees

Keywords

Commercial presence